Learn Car Audio the Right Way

Access free lessons, pro-classroom modules, livestreams, and installer tools — designed for builders and techs

Speaker Fitment & Subwoofer Matching

Course Type: Video Guide + Interactive Fitment Calculator
Level: Beginner to Intermediate
Target Audience: Installers, online buyers, DIY upgrade customers
Focus: How to measure fitment (mounting depth, diameter, location), pair subs with boxes, and avoid mismatched setups.
Bonus:

  • Fitment & Measurement Worksheet

  • Recommended Amp Kit Pairings
    Integrates With:

  • Enclosure Mastery

  • RMS Calculator

  • Full System Planning

DSP & Tuning Deep Dive

Course Type: Video Tutorial + Setup Flowchart + Tuning Checklist
Level: Intermediate
Target Audience: Installers tuning multi-amp systems, SQ enthusiasts, audio techs
Focus: Gain structure, crossover configuration, EQ, time alignment, and system calibration using DSPs.
Bonus:

  • Printable DSP Tuning Worksheet

  • Real-System DSP Tuning Walkthrough
    Integrates With:

  • Full System Planning

  • Signal Flow Course

  • Speaker Matching Module

Box Fitment & Sub Enclosures

Course Type: PDF Guide + Video Walkthrough + Interactive Worksheet
Level: Intermediate to Advanced
Target Audience: Fabricators, custom box builders, advanced DIYers
Focus: Understanding, designing, and building sealed, ported, bandpass, and fiberglass subwoofer enclosures. Includes bracing, displacement, and acoustic principles.
Bonus:

  • Enclosure Planning Checklist

  • Box Displacement Calculator
    Integrates With:

  • Subwoofer Fitment Tool

  • Reserve Zone Case Studies

  • Full System Planning Course

Full System Planning (Start to Finish)

Course Type: Guided PDF + Real Vehicle Walkthrough + Form
Level: All levels
Target Audience: Beginners, consultants, shop sales/install planners
Focus: Budget-based system design, component matching, fabrication planning, and workflow for real customer vehicles.
Bonus:

  • System Planning Form

  • 1-on-1 Consult Booking Link (optional upsell)
    Integrates With:

  • All other modules

  • Vehicle Fitment Form

  • RMS/Impedance Charts

⚡ RMS, Amplifier Class & Current Draw

Course Type: Video + Slide Deck + Instructor Notes
Level: Intermediate
Target Audience: Installers, students, anyone matching amps to subs
Focus: Teaches RMS math, amplifier class differences (A/B/AB/D), and how to estimate current needs using Watt’s Law.
Bonus: RMS Cheat Sheet, Current Draw Estimator PDF
Integrates With: Electrical Upgrades, Tools of the Trade, DSP Course

LOCs, High-Level Inputs & Signal Tapping

Course Type: Wiring Diagrams + Video Demo + Integration Guide
Level: Beginner to Intermediate
Target Audience: Techs doing radio-retention installs or DSP integration
Focus: Understand how to safely tap speaker wires, use load resistors, and integrate high-level signals.
Bonus: Factory Wire Tap Diagram Pack + Load Chart
Integrates With: DSP, OEM Integration, EV Modules

Wiring High & Low Current Accessories

Course Type: Video Demo + Fuse/Relay Charts + Checklist
Level: Beginner to Intermediate
Target Audience: Anyone adding horns, LEDs, USB chargers, fans, or amps
Focus: Explains how to safely wire both high-current and low-current accessories using proper gauge wire, relays, fuses, and distribution.
Bonus: Accessory Wiring Cheat Sheet + Amp Draw Chart
Integrates With: Relay Module, Lighting Control, Security

Marine & Powersports Audio Installation

Course Type: PDF Guide + Environment-Specific Video + Gear Sheet
Level: Intermediate
Target Audience: Installers working on UTVs, boats, motorcycles, trailers
Focus: Shows how to install systems in weather-exposed vehicles using marine-rated components, sealed connections, and safe mounting.
Bonus: Marine/Off-Road Planning Checklist + Sealant/Fuse Chart
Integrates With: Lighting Control, Reserve-Based Design, Fabrication

CNC Routing for Car Audio & Custom Panels

Course Type: Video Walkthrough + File Prep Guide + Layout Tips
Level: Intermediate to Advanced
Target Audience: Fabricators using CNC for beauty panels, trims, or routing
Focus: Covers G-code prep, safe material holding, bit selection, tool paths, and finishing techniques for CNC machines.
Bonus: Starter G-code Template + CNC Project Layout Sheet
Integrates With: Fabrication, Templates, 3D Printing, Enclosures

Fleet Installations & Service Protocols

Course Type: Fleet Workflow PDF + Video Case Studies + Checklist
Level: Intermediate
Target Audience: Installers or shops working with commercial fleets
Focus: Install GPS, dash cams, ELDs, beacons, or power systems for fleet clients with proper documentation and repeatable processes.
Bonus: Fleet Intake Form + Tagging/Inspection Checklist
Integrates With: Marine Wiring, Panel Removal, Reserve-Based Design

Intro to Fabrication: Templates, Trim & Panels

Course Type: PDF Guide + Shop Demo Video + Layout Worksheets
Level: Intermediate
Target Audience: Installers and fabricators building custom trims and inserts
Focus: How to design and cut beauty panels, wrap them cleanly, and prep templates using router and layout tools.
Bonus: Fabrication Planning Sheet + Routing Technique Reference
Integrates With: Tools of the Trade, CNC & 3D Printing, Enclosures

Teaching the Trade: Instructor Skills for Shops

Course Type: PDF Playbook + Tech Onboarding Checklist
Level: All Levels
Target Audience: Shop owners, leads, and trainers teaching junior techs
Focus: How to onboard, mentor, and track growth of new techs using structured checklists, safety briefings, and brand culture.
Bonus: Instructor Binder Template + Weekly Evaluation Sheet
Integrates With: Safety & Compliance, Tools Module, Curriculum Tracker

Relay Logic & Wiring Mastery

Course Type: Video Training + Diagram Pack + Real-World Examples
Level: Intermediate
Target Audience: Installers doing lighting, security, and smart switching
Focus: How relays work, SPST/SPDT wiring, polarity reversal, isolation, and timing circuits
Bonus:

  • Relay Diagram Reference Guide

  • Relay Project Worksheet

  • Mini Quiz + Completion Certificate (optional)
    Integrates With:

  • Security & Lighting Modules

  • Wiring Course

  • High/Low Current Accessories Module

Wiring, Distribution & Signal Flow

Course Type: Wiring Diagrams + Demo Videos + Pro Checklist
Level: Intermediate
Target Audience: Installers running multi-amp setups or adding distribution blocks
Focus: Explains proper RCA signal routing, grounding, remote triggers, and safe, scalable wiring practices.
Bonus: Wire Like a Pro Cheat Sheet, RCA Troubleshooting Chart
Integrates With: DSP & Tuning, Relay Wiring, EV Integration

Grounding & Noise Elimination

Course Type: Troubleshooting Flowchart + Video Case Studies
Level: Intermediate
Target Audience: Installers chasing alternator whine or system noise
Focus: How to identify, test, and fix ground loops, poor grounding points, and EMI noise in a system.
Bonus: Noise Diagnosis Flowchart + Grounding Reference Sheet
Integrates With: Signal Flow, Troubleshooting, EV Integration

Lighting Integration & Multi-Zone Control

Course Type: RGB Control Charts + Wiring Diagrams + Setup Demo
Level: All Levels
Target Audience: Builders wiring underglow, dome lights, RGB strips, or zones
Focus: How to wire and control LED strips, DRLs, dome lights, and addressable zones using remotes, RF/Bluetooth, or switches.
Bonus: Multi-Zone Control Diagram Pack + Controller Setup Guide
Integrates With: Relay Logic, Marine, Powersports, Accessories

Audio System Troubleshooting & Diagnostics

Course Type: Flowchart PDF + Step-by-Step Troubleshooting Guide
Level: Intermediate
Target Audience: Techs solving sound problems, dead zones, system faults
Focus: Guides you through diagnosing amp clipping, speaker failures, grounding issues, and RCA problems.
Bonus: Audio Troubleshooting Flow + Common Fix Sheet
Integrates With: Signal Flow, Noise Elimination, Tools of the Trade

Laser Engraving with LightBurn

Course Type: Software Demo + Vector Projects + Machine Setup PDF
Level: Beginner to Intermediate
Target Audience: Fabricators and hobbyists using diode or CO₂ lasers
Focus: Teaches vector vs raster engraving, LightBurn settings, material prep, and output file management for engraving plastic, acrylic, wood and metal plates.
Bonus: LightBurn Settings Sheet + Sample .LBRN Files
Integrates With: Fabrication, Templates, Shop Signage

Advanced Loudspeaker Design & Crossover Theory

Course Type: Slide Deck + Audio Demo + Crossover Models
Level: Advanced
Target Audience: Engineers, audiophiles, and pro-level tuners
Focus: Understand driver interaction, 2nd order crossovers, passive design theory, and acoustic system modeling.
Bonus: Crossover Reference Pack + Simulation Walkthrough
Integrates With: DSP Tuning, Enclosures, Signal Flow

OEM Integration Without Factory Head Unit Removal

Course Type: Wiring Guide + LOC/DSP Walkthrough + Signal Chart
Level: Intermediate
Target Audience: Shops retaining factory infotainment but upgrading sound
Focus: Use signal summing, high-level adapters, and turn-on logic to build full systems around the factory source unit.
Bonus: OEM Integration Flowchart + Load Resistor Chart
Integrates With: DSP Tuning, Speaker Matching, Signal Flow

Creating Your First Install Video (Shop Edition)

Course Type: Video Planning Sheet + Editing App Walkthrough
Level: Beginner to Intermediate
Target Audience: Shops or techs creating marketing videos or educational content
Focus: Plan, film, and publish your first clean shop install video with pro shot framing, product overlays, and music-safe editing tools.
Bonus: Install Video Shot List + Suggested Apps List
Integrates With: Instructor Module, Tool Demos, Product Content

Electrical Upgrades & Reserve-Based Design

Course Type: Conceptual Video Training + Visual Wiring Demo + Reserve Calculator
Level: Intermediate
Target Audience: Builders running multiple amps, alternator/battery upgrade customers
Focus: System electrical planning including Big 3 upgrade, batteries, isolators, alternators, and reserve capacity logic.
Bonus:

  • Reserve-Based Design PDF

  • Fuse Sizing Chart (by draw and wire gauge)
    Integrates With:

  • RMS Calculator

  • Wiring/Distribution Course

  • EV Integration Module

Understanding Audio Signal Flow

Course Type: Interactive Diagram + Explainer Slides + PDF Handout
Level: Beginner
Target Audience: Students and new techs learning signal routing basics
Focus: Learn how audio signals move from head unit to amp to speaker and where each gain stage lives.
Bonus: Signal Flow Path Graphic + Balanced vs Unbalanced Chart
Integrates With: Wiring & Distribution, DSP & LOC Modules

🔍 Advanced Troubleshooting: Signal & EMI Interference

Course Type: Step-by-Step Guide + Case Study Video
Level: Advanced
Target Audience: Senior techs or leads who handle diagnostic tickets
Focus: Diagnose tough signal path, EMI, and grounding issues using scopes, clamps, and signal probes.
Bonus: Signal Path Error Flow + Ground Isolation Worksheet
Integrates With: Noise Elimination, DSP & Signal Flow

Security System & Remote Start Wiring

Course Type: Schematic Pack + Bypass Guide + Vehicle Examples
Level: Advanced
Target Audience: Installers adding alarms, starters, or CAN-based interfaces
Focus: Covers ignition wiring, tach sourcing, bypass modules, disarm/arm logic, remote start triggers, and immobilizer safety protocols.
Bonus: Remote Start Planning Sheet + Data Bus Pinout Chart
Integrates With: Relay Wiring, Panel Removal, Lighting, EV

Audio & Electronics Integration for EVs

Course Type: EV-Specific Install Guide + Safety PDF + System Map
Level: Advanced
Target Audience: Installers working on Tesla, Rivian, hybrid & EV systems
Focus: How to tap into EV systems safely, find audio signal paths, retain factory integration, and avoid battery drain or error codes.
Bonus: EV Audio Planning Sheet + CAN/High-Voltage Safety Chart
Integrates With: OEM Integration, Signal Flow, Reserve Design

3D Printing for Custom Car Audio Fabrication

Course Type: Slicer Settings PDF + STL Bundle + Video Walkthrough
Level: Intermediate
Target Audience: Installers and builders using 3D printers for pods, mounts, panels, or tool racks
Focus: Learn slicer setup, layer heights, material strength, and how to design 3D printed audio gear brackets or trim parts.
Bonus: Print Settings Guide + STL Starter Bundle
Integrates With: CNC, Fabrication, Dash Disassembly

Heat, Vibration & Installation Longevity

Course Type: PDF Guide + Material Comparison + Case Demo
Level: All Levels
Target Audience: Installers, fabricators, and shop leads ensuring long-term installs
Focus: Explains how thermal cycling, vibration, and poor adhesive choices cause failures — and how to prevent them.
Bonus: Material Reference Sheet + Longevity Planning Guide
Integrates With: Marine Installs, Dash Disassembly, Fabricationn

Vehicle Evaluation, Data Sheets & Fitment Reports

Course Type: Vehicle Data PDF + Walkthrough Guide + Fitment Form
Level: All Levels
Target Audience: Installers performing assessments, retail shops quoting installs
Focus: Decode VINs, locate factory systems, verify wire colors, and document vehicle-specific install plans with printable forms.
Bonus: Speaker Fitment Map + Vehicle Intake Sheet
Integrates With: Speaker Matching, System Planning, OEM Integration

Tools of the Trade

Course Type: Visual Inventory + Tool Demos + PDF Checklist
Level: All Levels
Target Audience: Techs, students, and shops building out toolkits
Focus: What every installer should own — hand tools, panel tools, sockets, cutting bits, and safe usage techniques.
Bonus: Tiered Tool Checklist + Tool Maintenance Guide
Integrates With: Fabrication, Dash Disassembly, Wiring